skateboard cost

How to Ride an Electric Skateboard: 6 Steps (Beginners Guide)

How to Ride an Electric Skateboard: 6 Steps Beginners Guide. Skateboarding is of very fun-loving and healthy activity. The first wireless skateboard was introduced in 1999 ever since the technology itself has evolved vastly. The electric skateboard is similar to the traditional skateboard in terms of design language. If you know how to ride a traditional skateboard then riding the electric skate will be a cup of tea for you.

And, If you have no prior knowledge of how to ride a skateboard it may be a problematic and time-consuming process for you. Traditional skateboards are totally manual tools while the e-skateboards are powered by electric motors and batteries. The e-skateboards have more power, speed, and traveling range than traditional skateboards.

What are the differences between electric skateboards and regular skateboards?

In terms of design both traditional and electric skateboards are very identical the main difference of an electric skateboard is that it has one or more battery-powered motors. These components provide a lot of benefit to the rider.

Now easily affordable skateboards can go at the speed of 20 mph with ease. These skateboards are very helpful on inclined and uphill terrains. The battery of the skateboard plays an important role in increasing the travel range of the rider. A rider can ride it for longer distances without getting tired in comparison to traditional skateboards. The electric skateboards some times come with led panels to monitor speed, and battery percentage.

How to ride an electric skateboard

Riding a skateboard is not a tough task for the person who already knows how to ride the traditional skateboard that requires manual propelling while electric skateboards are operated by remote and throttles making it a little tricky it may require a lot of practice to perfect this sport. 

Yet it is very convenient for traditional skateboard riders. But if you are new to this sport you may find it tough. Maintaining balance may be very difficult it will require a lot of practice.

Here are some steps that a rider should follow to ride an electric skateboard.

Step 1: Wear the proper safety gear

Wearing the proper safety gear is very essential for any exhausting sport. You should be responsible in case of any injury if you are not wearing the gear. For the traditional skateboards there are chances that you can ride the skateboard without the gear but when it comes to electric skateboards wearing gear is very very essential because of the high speed the motor generates. The proper safety gear includes wrist guards, elbow pads, and, knee pads.

The wrist guards protect you from the injuries that your hands catch yourself in order to protect yourself from injuries. Elbow pads save your elbows from injuries, and knee pads save your knees because the dislocation of elbow and knee is very common in people who got injured while riding the skateboards.

Another essential safety gear is the helmet which has been ranked top tier for safety. Helmet protects the against major head injuries and proper fitting of helmets is necessary they should be tightened neither too tight nor too loose. Comfort should be the key.

Step 2: Check your trucks and settings

Skateboard trucks play a vital role in the over all riding experience. These trucks are mounted to the bottom of the deck. These trucks are responsible for the balancing of the skateboard. One truck is attached at the front and the other truck is attached at the bottom of the desk. If you are new to skateboards you should keep in mind that the trucks are nice and tight so you can have better weight balancing. You can lose trucks latter for better flexibility and to take sharp turns.

While riding the electric skateboard it is essential to understand the control settings of the remote. As the remote has the main features of moving forward, backward, or stopping the board and maintaining the speed of the electric skateboard. If you are a beginner you should probably start with a slow speed and get comfortable with the ride and then increase the speed gradually.

Step 3: Choose a skateboard stance

If you are a skateboarder you may already have the stance that you may have comfortable with. Or stance of snowboarding will be fine too because both sports share some traits. There are two types of stances.

  • Regular Stance
  • Goofy Stance

Regular Stance

Regular is when you put your left foot forward towards the board’s nose. Leading with the left foot is very popular because most of people are right-handed.

Goofy Stance

The goofy stance is with your right foot forward towards the board’s nose. The goofy stance helps you to maneuver freely.

In theory, there is no natural stance, Your stance is depending upon your comfort level your body adopts the natural stance and then it becomes the permanent one. While riding the electric skateboard bending your knees is also a part of the stance. This bending gives the rider a great balance while riding the skateboard.

Most electric skateboards are longer in length than traditional skateboards. Because of this trait, the rider has a wider stance on electric skateboards. This wider stance allows the rider to have better balancing. While on the other hand, it becomes difficult to take sharp turns.

Step 4: Start riding

Start riding the skateboard with prayer rituals always. The traditional skateboards were ridden by kick push. It is the best way to start riding the electric skateboard too, to have one foot on the skateboard and use the other foot to push the skateboard, This technique is very well appreciated as it gives better balancing. After doing this you can use the remote to adjust the speed. Starting off with both your feet on a skateboard and using motors to push you forward may be a little risky process.

While riding the electric skateboard always start with the slow motion and go fast afterward when you got the full understanding and complete balance on the skateboard. Remember to relax your body, bend your knees for better balancing, and hold your arms out before initial acceleration.

Step 5: Learn how to turn

How can I turn the skateboard? It is the most frequently asked question while learning how to ride the skateboard. There are two basic ways to turn the skateboard.

  • Heelside
  • Toeside

In a regular stance, the heelside will turn you left and the toeside will turn you right but in the case of a goofy stance it is the opposite for both sides. For the heelside turn bend your knees a little and take your butt out and put your body weight on the heel of your front foot in order to turn the skateboard.

For to eside turn bend your knees lean forward in the direction of the turn put your whole body weight on the front toe in order to turn the skateboard.

Kick-turn is another popular way to turn your skateboard. It is considered as the advanced level of turning. In kick-turn the rider puts all of his body weight on the back wheel and makes the front side of the skateboard to be up the floor then the rider holds the front of the skateboard and turns it in the desired direction.

Step 6: How to brake

The braking is a very important part of learning how to ride a skateboard. Riding a skateboard without knowing how to brake is like putting yourself in danger. To stop the skateboard you should bend your knees and maintain the balance and then use the remote to lower down the speed gradually. Having the perfect posture while braking will save you from any injuries.

Foot braking is also a convenient way to stop your electric bike.

How to fall correctly

Falling is inevitable in this sport. The more you learn the less you fall, It is very important to learn the falling techniques because these techniques save you from major injuries. If you are falling forward you should roll up with your arms and shoulder in order to protect your head from injury. The same in the case of side falls and back falls. Learn the falling techniques more frequently on grass so that you can protect yourself from major impacts.

For more information:


Electric skateboards are very beneficial as they add extra range and high speed for the riders. Once you got an understanding of what you are riding then riding it becomes very easy because of its remote control. This guide will help beginners in riding the skateboard with ease.

A flow chart

Learning to ride an electric skateboard can vary from person to person, but it’s generally not too difficult. With basic balance and coordination skills, most individuals can pick it up quickly. Practice and safety awareness are essential for mastering the board’s controls and handling different terrains.

To learn to ride an electric skateboard, start in a safe, open area with flat ground. Place one foot on the board, gently accelerate, and maintain balance. Use the remote control to control speed and braking. Practice turns and gradually increase confidence and skill while always wearing appropriate safety gear.

To stop an electric skateboard, gradually release the throttle or brake lever, depending on the skateboard’s controls. Apply light pressure to the brake for a smoother stop. Alternatively, use your foot to drag on the ground to slow down gradually. Always practice in a safe area to master control and stopping.

To go fast on an electric skateboard, first, ensure the skateboard is fully charged. Find a smooth, open area with minimal obstacles. Gradually increase the speed using the controller, leaning slightly forward for acceleration. Achieve speeds between 15-30 mph while maintaining proper balance and caution for safety.

Yes, you can push an electric skateboard manually like a regular skateboard. Electric skateboards often have a freewheeling mode, allowing you to push and ride them without using the motor. However, pushing an electric skateboard in this way might be slightly heavier due to the motor and battery components.

Generally, electric skateboards have motors ranging from 200 to 2000 watts, providing enough power to achieve speeds between 15 to 25 mph and cover distances of 10 to 20 miles per charge.

Similar Posts